your hardware ain’t shit until it’s a first gen core2duo in a random Dell office PC and 2gb of memory that you specifically only use just because it’s a cheaper way to get x86 when you can’t use your raspberry pi.
Also they lie most of the time and it may technically run fine on more memory, especially if it’s older when dimm capacities were a lot lower than they can be now. It just won’t be “supported”.
Me on a RPi4.
My first @home server was an old defective iMac G3 but it did the job (and then died for good) A while back, I got a RP3 and then a small thin client with some small AMD CPU. They (barely) got the job done.
I replaced them with an HP EliteDesk G2 micro with a i5-6500T. I don’t know what to do with the extra power.
What are you running on it?
Prosody (XMPP server), a git instance, a searXNG instance, Tandoor (recipe manager), Next Cloud, Syncthing for my phone and my partner’s (one could say Next Cloud should be enough but I use it for different purposes), and a few other stuff.
It doesn’t even use an eight of its total RAM and I’ve never seen the CPU go past 20℅. But it uses a lot less power than the thin client it replaced so not a bad investment, especially considering its price.
How do you like searxng and have you considered hosting openstreetmaps?
Searxng is very good, I like it a lot. As for OSM, I didn’t even know it could be hosted.
Thanks, I was put off by the install process but now I will give it another go.
I run a local LLM on my gaming computer thats like a decade old now with an old 1070ti 8GB VRAM card. It does a good job running mistral small 22B at 3t/s which I think is pretty good. But any tech enthusiast into LLMs look at those numbers and probably wonder how I can stand such a slow token speed. I look at their multi card data center racks with 5x 4090s and wonder how the hell they can afford it.
Odd, I have a Celeron J3455 which according to Intel only supports 8GB, yet I run it with 16 GB
Same here in a Synology DS918+. It seems like the official Intel support numbers can be a bit pessimistic (maybe the higher density sticks/chips just didn’t exist back when the chip was certified?)
My NAS is on an embedded Xeon that at this point is close to a decade old and one of my proxmox boxes is on an Intel 6500t. I’m not really running anything on any really low spec machines anymore, though earlyish in the pandemic I was running boinc with the Open Pandemics project on 4 raspberry pis.
I’m hosting a minio cluster on my brother-in-law’s old gaming computer he spent $5k on in 2012 and 3 five year old mini-pcs with 1tb external drives plugged into them. Works fine.
Running a bunch of services here on a i3 PC I built for my wife back in 2010. I’ve since upgraded the RAM to 16GB, added as many hard drives as there are SATA ports on the mobo, re-bedded the heatsink, etc.
It’s pretty much always ran on Debian, but all services are on Docker these days so the base distro doesn’t matter as much as it used to.
I’d like to get a good backup solution going for it so I can actually use it for important data, but realistically I’m probably just going to replace it with a NAS at some point.
A NAS is just a small desktop computer. If you have a motherboard/CPU/ram/Ethernet/case and a lot of SSDs/HDDs you are good to go.
Just don’t bother to buy something marketed as NAS. It’s expensive and less modular than any desktop PC.
Just my opinion.
4 gigs of RAM is enough to host many singular projects - your own backup server or VPN for instance. It’s only if you want to do many things simultaneously that things get slow.
It is amazing what you can do with so little. My server has nas, jellyfin, plex, ebook reader, recipe, vpn, notes, music server, backups, and serves 4 people. If it hits 4gb ram usage it is a rare day.
I’m still interested in Self-Hosting but I actually tried getting into self-hosting a year or so ago. I bought a s***** desktop computer from Walmart, and installed window server 2020 on it to try to practice on that.
Thought I could use it to put some bullet points on my resume, and maybe get into self hosting later with next cloud. I ended up not fully following through because I felt like I needed to first buy new editions of the server administration and network infrastructure textbooks I had learned from a decade prior, before I could continue with giving it an FQDN, setting it up as a primary DNS Server, or pointing it at one, and etc.
So it was only accessible on my LAN, because I was afraid of making it a remotely accessible server unless I knew I had good firewall rules, and had set up the primary DNS server correctly, and ultimately just never finished setting it up. The most ever accomplished was getting it working as a file server for personal storage, and creating local accounts with usernames and passwords for both myself and my mom, whom I was living with at the time. It could authenticate remote access through our local Wi-Fi, but I never got further.
Hard to understad why it was difficult. For some reason windows admins are afraid of experimenting, breaking things. Practically I became sys admin by drinking beer and playing with linux, containers, etc.
Testing federation from my shit hardware… 😅
Not seeing other comments… but see this over at .world
Looks like it works! Congrats!
Why didn’t you post this before I bought the RAM?!
The oldest hardware I’m still using is an Intel Core i5-6500 with 48GB of RAM running our Palworld server. I have an upgrade in the pipeline to help with the lag, because the CPU is constantly stressed, but it still will run game servers.
The beauty of self hosting is most of it doesn’t actually require that much compute power. Thus, it’s a perfect use for hardware that is otherwise considered absolutely shit. That hardware would otherwise go in the trash. But use it to self host, and in most cases it’s idle most of the time so it doesn’t use much power anyway.
N…not quite…
