I upgraded two Prusa MK3s to MK3.9, and ended up with a couple of spare boards, stepper motors and a bunch of other things. So I decided to turn them into a Makelangelo clone!

Since the school I work at had these large standing whiteboards, I designed and printed corner brackets to hold the motors, as well as a base for the electronics.

1000006226

I’m still having trouble with the homing process, but very happy with the results so far!

I’ll be posting the firmware and 3d printed files online soon.

      • @SchmidtGenetics@lemmy.world
        link
        fedilink
        English
        21 year ago

        You can use multiple pulleys and shackles to take the distance of the rope up.

        It’s how they do it inside of machines as far as I’ve seen.

        • @anguo@lemmy.caOP
          link
          fedilink
          English
          21 year ago

          I still feel the distance they travel will stay the same. Except if I use a gear train.

            • @anguo@lemmy.caOP
              link
              fedilink
              English
              2
              edit-2
              1 year ago

              Ah yes, different sized pulleys would work the same as the gear train I had in mind. Thanks for the explanation!

              Edit: on second look, it’s more complex than that, as the weight is not connected to the end of the rope, but on a pulley.

              • @SchmidtGenetics@lemmy.world
                link
                fedilink
                English
                21 year ago

                Likely number 2 would be enough, would double the distance itself. You just need to attach it to the same corner bracket and have a pulley with the weight under it.