I just got my home server up and running and was wondering what you guys recommend for backups. I figure it will probably be worth having backups on cloud servers tjay are external, are there any good services yall use for that?

  • @traches@sh.itjust.worksEnglish
    4•2 years ago
    • restic > backblaze b2, nightly & automatic
    • restic > normally unplugged drive, every couple weeks (manual, recurring reminder)
    • @pacjo@lemmy.worldEnglish
      3•2 years ago

      Not so much about testing, but one time I really needed to get to my backups I lost password to the repository (I’m using restic). Luckily a copy of it was stored in bitwarden, but until I remembered it, were perhaps one of the worst moments.

      Needless to say, please test backups and store secrets in more then one place.

    • @witten@lemmy.worldEnglish
      7•2 years ago

      Ehhh I would say then you have probabilistic backups. There’s some percent chance they’re okay, and some percent chance they’re useless. (And maybe some percent chance they’re in between those extremes.) With the odds probably not in your favor. 😄

  • shadowbert
    0•2 years ago

    Duplicati, to a friend’s home server who lives in another town.

    • @GlitzyArmrest@lemmy.world
      7•2 years ago

      I hate to ask the scary question, but have you tried to restore your backups before? I used Duplicati and discovered that none of my backups were usable and ended up switching to Duplicacy.

  • @Auli@lemmy.caEnglish
    2•2 years ago

    I use OneDrive. Buy the Costco subscription and get like 15 months for around 110 CAD. GIVES 6 TB. I create some fake accountsink the sharing to my main account. I have an encrypted rxlone share for some things and others I GPG encryot the tar before sending it up. Been working fine for a couple years and I have multiple TB backed up.

  • @beerclue@lemmy.worldEnglish
    3•2 years ago

    I used to have everything backed up to a 2TB USB drive. Which I accidentally dropped down the stairs. I lost thousands of family photos and documents. That changed my backup perspective.

    I now have a Synology NAS, with 12TB in a RAID5 array (for a bit of disk redundancy). All my home devices, Proxmox servers etc back up here. The NAS also holds a few TB of media. Attached to it I have a USB hard drive (also 12TB). The NAS gets fully backed up to the USB drive nightly.

    I also have a remote Raspberry Pi with a smaller USB drive (4TB) attached to it at my brother’s house (in another country), where I backup most of the contents of my home NAS. I don’t back up the media, just the important stuff. I might have to upgrade to a larger drive…

    • amiganEnglish
      16•2 years ago

      I used to have everything backed up to a 2TB USB drive. Which I accidentally dropped down the stairs. I lost thousands of family photos and documents. That changed my backup perspective.

      If it’s the only copy, it’s not a backup. It’s the master.

  • @wibo@lemmy.worldEnglish
    7•2 years ago

    I use restic to backup my raspberry Pi’s to my Synology NAS and backup my NAS to backblaze.

  • @spez_@lemmy.worldEnglish
    8•2 years ago

    I use Restic + Resticprofile to back up everything and store it on my local HDD.

    Then, I use Rclone to sync the local repository to Backblaze B2.

    Here’s my general setup:

    /.config/restic/
├── logs
│   ├── statuses
│   │   ├── restic-status-20230202T020202.json
│   │   └── restic-status-20230101T010101.json
│   ├── restic-check-20230202T020202.log
│   └── restic-backup-20230101T010101.log
├── config
│   ├── profiles.yaml
│   ├── excludes.txt
│   ├── rclone.conf
│   └── password.txt
├── bin
│   ├── restic_0.15.2_linux_arm64
│   ├── rclone_1.63.1_linux_arm64
│   └── resticprofile_0.22.0_linux_arm64

    version: "1"

# Schedules (https://www.freedesktop.org/software/systemd/man/systemd.time.html#Calendar%20Events)
{{ $SCHEDULE_RESTIC_BACKUP := "*-*-* 22:00:00" }}       # Daily at 10PM
{{ $SCHEDULE_RESTIC_CHECK := "Sat *-*-* 04:00:00" }}    # Weekly at 4AM on Saturday
{{ $SCHEDULE_SYNC_BACKUP := "Sun *-*-* 21:30:00" }}     # Weekly at 11.30PM on Sunday
{{ $SCHEDULE_POSTGRES_BACKUP := "Fri *-*-* 20:00:00" }} # Weekly at 8PM on Friday

# Directories
{{ $LOCATION_RESTIC_BINARY := "/home/deck/Desktop/.config/restic/bin/restic_0.15.2_linux_arm64" }}
{{ $LOCATION_RESTIC_REPO := "/home/deck/Desktop/restic-repo" }}
{{ $LOCATION_RESTIC_LOG := "/home/deck/Desktop/.config/restic/logs" }}
{{ $LOCATION_RESTIC_STATUS := "/home/deck/Desktop/.config/restic/logs/statuses" }}
{{ $LOCATION_RESTIC_BLOCKED_FILE := "/home/deck/Desktop/.config/restic/BLOCKED" }}
{{ $LOCATION_RCLONE_BINARY := "/home/deck/Desktop/.config/restic/bin/rclone_1.63.1_linux_arm64" }}
{{ $LOCATION_RCLONE_REPO := "bucket:restic-backup-12345" }}
{{ $LOCATION_RCLONE_CONFIG := "/home/deck/Desktop/.config/restic/config/rclone.conf" }}
{{ $LOCATION_RESTICPROFILE_LOCK := "/tmp/resticprofile-default.lock" }}
{{ $LOCATION_POSTGRES_DUMP := "/home/deck/Desktop/dumps" }}
{{ $LOCATION_PRIMARY_BACKUP_SOURCE := "/home/deck/Desktop/" }}

# Configs
{{ $CONFIG_CURRENT_TIME := .Now.Format "20060102T150405" }}
{{ $CONFIG_RESTIC_PASSWORD := "/home/deck/Desktop/.config/restic/config/password.txt" }}
{{ $CONFIG_RESTIC_EXCLUDE := "/home/deck/Desktop/.config/restic/excludes.txt" }}

global:
  default-command: snapshots                      # Run 'snapshots' when no command is specified
  initialize: false                               # Do not initialize a repository if none exists
  priority: low                                   # Use priority class on Windows and "nice" on Unixes
  min-memory: 100                                 # Minimum required RAM for Resticprofile to start
  restic-lock-retry-after: 5m                     # Retry failed restic command acquisition every 5 minutes
  restic-stale-lock-age: 10h                      # Unlock stale lock if age exceeds 10 hours
  restic-binary: '{{ $LOCATION_RESTIC_BINARY }}'  # Location of the Restic binary

default:
  lock: '{{ $LOCATION_RESTICPROFILE_LOCK }}'      # Local lockfile to prevent concurrent profile runs
  force-inactive-lock: true                       # Detect and remove stale locks
  initialize: true                                # Initialize repository if it doesn't exist
  repository: '{{ $LOCATION_RESTIC_REPO }}'       # Path to Restic repository
  password-file: '{{ $CONFIG_RESTIC_PASSWORD }}'  # File containing repository password
  status-file: '{{ $LOCATION_RESTIC_STATUS }}/{{ $CONFIG_CURRENT_TIME }}-restic-status.json'  # Output status file
  compression: 'max'                              # Maximum compression level
  run-after-fail:                                 # Block syncing if there was a failure. TODO: Add an email
    - 'echo "The command ${PROFILE_COMMAND} has failed in ${PROFILE_NAME}. Please check the logs." > {{ $LOCATION_RESTIC_BLOCKED_FILE }}'

  backup:
    run-before:                                   # Bring down Docker before backup
      - 'systemctl stop docker.socket'
      - 'systemctl stop docker'
    run-finally:
      - 'grep --invert-match -E "^unchanged|\(0 B added, 0 B stored\)|\(0 B added\)" {{ tempFile "backup.log" }} > {{ $LOCATION_RESTIC_LOG }}/{{ $CONFIG_CURRENT_TIME }}-restic-backup.log'  # Copy log file, stripping out any unchanced files
      - 'systemctl start docker'                  # Bring Docker back online after backup
    one-file-system: false                        # Exclude other file systems
    no-error-on-warning: true                     # Don't consider warnings as backup failures
    source:                                       # Directories to back up
      - '{{ $LOCATION_PRIMARY_BACKUP_SOURCE }}'
    exclude-file: '{{ $CONFIG_RESTIC_EXCLUDE }}'  # File containing exclude patterns
    exclude-caches: true                          # Exclude cache files
    schedule: '{{ $SCHEDULE_RESTIC_BACKUP }}'     # Backup schedule
    schedule-permission: system                   # Schedule permission
    schedule-lock-wait: 10m                       # Wait time for the lock during schedule
    schedule-log: '{{ tempFile "backup.log" }}'   # Log file to /tmp. This contains all information, including unchanged files which we do not care about
    verbose: 2                                    # Log details about processed files

  check:
    schedule: '{{ $SCHEDULE_RESTIC_CHECK }}'      # Verification schedule
    schedule-permission: system                   # Schedule permission
    schedule-lock-wait: 10m                       # Wait time for the lock during schedule
    schedule-log: '{{ $LOCATION_RESTIC_LOG }}/{{ $CONFIG_CURRENT_TIME }}-restic-check.log'  # Log file
    read-data: true                               # Verify data during check

  prune:
    dry-run: true                                 # Only prune if safe to do so, change manually
    repack-uncompressed: true                     # Repack all uncompressed data

  forget:
    dry-run: true                                 # Only forget if safe to do so, change manually

  rewrite:
    dry-run: true                                 # Only rewrite if safe to do so, change manually
    forget: true                                  # Remove original snapshots after creating new ones
    exclude-file: '{{ $CONFIG_RESTIC_EXCLUDE }}'  # File containing exclude patterns

  mount:
    allow-other: true                             # Allow other users to access the mount point

  rebuild-index:
    read-all-packs: true                          # Read all pack files to generate new index from scratch

# The following shell profiles are simply to run other shell scripts at a scheduled time
# We do not actually run the primary Restic commands listed, as we exit the process early

shell-postgres:                                   # Profile to run shell scripts only. We exit the current process before Restic can run.
  backup:
    schedule: '{{ $SCHEDULE_POSTGRES_BACKUP }}'   # Postgres backup schedule
    schedule-permission: system                   # Schedule permission
    schedule-lock-mode: ignore                    # Ignore locks, if any
    schedule-log: '{{ $LOCATION_RESTIC_LOG }}/{{ $CONFIG_CURRENT_TIME }}-postgres-backup.log'  # Log file
    dry-run: true                                 # Don't write data
    run-before:                                   # Dump postgres databases
      - 'chmod 777 /var/run/docker.sock'
      - 'docker exec -t immich-postgres pg_dumpall -c -U postgres | gzip > "{{ $LOCATION_POSTGRES_DUMP }}/immich-dump-{{ $CONFIG_CURRENT_TIME }}.sql.gz" && echo "Dumped Immich database: {{ $LOCATION_POSTGRES_DUMP }}/immich-dump-{{ $CONFIG_CURRENT_TIME }}.sql.gz"'
      - 'docker exec -t joplin-postgres pg_dumpall -c -U joplin | gzip > "{{ $LOCATION_POSTGRES_DUMP }}/joplin-dump-{{ $CONFIG_CURRENT_TIME }}.sql.gz" && echo "Dumped Joplin database: {{ $LOCATION_POSTGRES_DUMP }}/joplin-dump-{{ $CONFIG_CURRENT_TIME }}.sql.gz"'
      - 'kill $$'

shell-sync:
  backup:
    schedule: '{{ $SCHEDULE_SYNC_BACKUP }}'       # Sync backup schedule
    schedule-permission: system                   # Schedule permission
    schedule-lock-mode: ignore                    # Ignore locks, if any
    schedule-log: '{{ $LOCATION_RESTIC_LOG }}/{{ $CONFIG_CURRENT_TIME }}-rsync-backup.log'  # Log file
    dry-run: true                                 # Don't write data
    run-before:                                   # Sync the Restic repo, after checking if the repository is in good health
      - 'if [ -f "{{ $LOCATION_RESTIC_BLOCKED_FILE }}" ]; then echo "There has been a problem with the Restic repository, please check the logs. If everything is okay, delete the BLOCKED file." && kill $$; fi'
      - '{{ $LOCATION_RCLONE_BINARY }} -v sync {{ $LOCATION_RESTIC_REPO }} {{ $LOCATION_RCLONE_REPO }} --config={{ $LOCATION_RCLONE_CONFIG }} --b2-hard-delete'
      - '{{ $LOCATION_RCLONE_BINARY }} cleanup {{ $LOCATION_RESTIC_REPO }} --config={{ $LOCATION_RCLONE_CONFIG }}'
      - 'kill $$'

    Resticprofile doesn’t let me run other shell commands on a schedule, and because I wanted everything in a single configuration, I just created two new profiles which call the backup command. I then made the shell commands run before Restic, and then finally killed the instance before it got to actually run, which effectively does what I needed.

    • @pacjo@lemmy.worldEnglish
      2•2 years ago

      It’s the first time I hear about resticprofile and it looks nice. So far I’ve been using crestic for configuration files. Do you know how they compare?

      • @spez_@lemmy.worldEnglish
        1•2 years ago

        It seems like they have the same objectives - allow for easier configuration of Restic. I’ve never heard of Crestic until now. I’d say stick with what you’re comfortable with

  • @hollyberries@lemmy.blahaj.zoneEnglish
    3•2 years ago

    I use Duplicati connected to Storj with data volumes that incrementally get backed up once per month. My files don’t change very often, so monthly is a good balance. Not counting my Jellyfin library, those backups are around 1 TB. With the Jellyfin library, almost 15 TB.

    Earlier this year, I recovered from a 100% data loss scenario, as I didn’t (and still don’t) have space for physical backups. I have a 25 TB allowance, so my actual cost was €0. If I had to pay, it would have been under €1.

      • @hollyberries@lemmy.blahaj.zoneEnglish
        2•2 years ago

        Definitely 25 TB. I’ve used the service for a long time, since before they accepted credit cards. I attached my credit card one day and got a bump to 25 TB. Since that happened, I pay basically nothing and my account is still 100% storj token funded.

        Edit: I dug up screenshots I sent someone recently

        • DeebsterEnglish
          1•2 years ago

          my account is still 100% storj token funded

          That seems to be the key bit, since everyone can use up to 25TB (if they can pay for it). Are you also hosting a node to earn credits tokens?

    • @gamer@lemm.eeEnglish
      2•2 years ago

      That looks like a cool setup, but I would never trust important data to some crypto shit (Storj) no matter what kind of track record they have.

      • @hollyberries@lemmy.blahaj.zoneEnglish
        3•2 years ago

        That’s fair. I’m 100% onboard the decentralisation train, and do my hardest to practice what I preach. In the event that the service does go bust, I can make a backup on a different S3 compatible service immediately as long as my working copy is intact. The likelihood of the backup service AND the working copy dying at the exact same time would be my cue to take up knitting.

  • GiddyEnglish
    1•2 years ago

    I use nightly borg backup to a separate box and then that box uses rclone to back up the borg repo offsite. Before running the borg backup I export all databases and docker volumes so they get picked up.

  • @kalleboo@lemmy.worldEnglish
    4•2 years ago

    Backblaze B2 for automatic syncing of all the little files

    Glacier for long term archiving of old big files that never change

    • TheHolmEnglish
      0•2 years ago

      Their prices are ridicules if you add cost of outbound traffic.